Yagi Dipole Vertical 3 Element Yagi Instruction Element Yagi Instruction Manual Yagi Dipole Vertical (Patent # 6,677,914) SteppIR Antennas 2112 - 116th Ave NE.

However, I keep seeing builds where some use metal conduit as a boom and the elements are soldered on and others use PVC or some other non-conductive material and glue the elements on.2015. I have been doing research on various yagi antennas and plan on building my own to hopefully increase the 4G LTE signal we get inside the house. * 4G LTE Outdoor Antenna * High Gain directional antenna * Gain: 28dBi * Polarization Type:Vertical * Radiation: Directional * Connector Type: SMA/TS-9/CRC-9.4. The LPDA a wide band antenna that covers the vast majority of carrier's frequencies and bands from full 600MHz (Band 71) support, up to 3800MHz.Easy to Build WIFI 2.4GHz Yagi Antenna: This antenna will extend the range of your WiFi or 2.4GHz devices (like surveillance cameras) into many miles and kilometers. LTE FIX has redesigned our LPDA antenna to include full Band 71 support (600MHz). The WiFiX 600-3800MHz LPDA Yagi Radome is a 9dBi-11dBi Cellular (17.313in/440mm) Directional Antenna. Use this line to measure out the spacing.

2) Use a sharpie to draw a straight line on the 6.3mm Bunnings aluminium rod. 2mm fencing wire & some small wire cutters does the job, try to get the lengths as accurate as possible. 1) Use the dimension for the elements from the design I posted above to measure and cut the elements. Explanations are provided with antenna assembly instructions.

To avoid having stray current on the braid of a coaxial cable (often the cause of RF and/or TVI/BCI), you can make your own 1:1 choke balun with coaxial cable.

This antenna does not require any balun.

Prevents oxydisation, damp ingress, and limits chemical reaction between stainless steel and aluminum.

Copper conductive grease: Professional conductive grease with a copper base, recommended for all hardware requiring a sound and lasting electrical contact.

Prevents binding, corrosion and the formation of aluminum oxide, and allows easy dismantling of antennas after several years.

Aluminum contact grease: Professional grease containing 30% aluminum particles, recommended for the assembly of aluminum antenna tubes.

Standard Mast size (mm)/(inch): 50/2 (55/2.25 or 60/2.50 optional at no extra cost)Ģ kinds of grease are supplied with your antenna:.

Forward gain in free space 15/10m (dBi): 6.5/6.7.

This design uses a Reflector-Driven element on 15m and a Driven element-Director on 10m. No traps or relays, one single coaxial cable. 15/10 meter 4 element beam Yagi (21-28 MHz).

Antenas yagi 10m